Products
Showing 64–72 of 74 items
Sodium Phosphate Monobasic Dihydrate
CAS NO : 13472-35-0
MOLECULAR FORMULA :NaH2PO4•2H2OÂ
MOLECULAR WEIGHT :156.01
Alternate Names: Sodium dihydrogen phosphate dihydrate; Monosodium phosphate dihydrate Application: Sodium phosphate monobasic dihydrate is a high buffering capacity reagent Physical State : Solid Storage : Store at room temperature 
Sodium Phosphate Monobasic Monohydrate
CAS NO: 10049-21-5
Synonyms: Sodium dihydrogen phosphate monohydrate; Monosodium phosphate monohydrate
Chemical Formula: H2NaO4P·H2O
Molecular Weight: 137.99 g/mol
Application: Sodium Phosphate, Monobasic, Monohydrate is a reagent with very high buffering capacity for formulating screens or for optimization.
CAS NO: 10049-21-5 Synonyms: Sodium dihydrogen phosphate monohydrate; Monosodium phosphate monohydrate Molecular Formula : H2NaPO4·H2O Molecular Weight: 137.99 g/mol Application: Sodium Phosphate, Monobasic, Monohydrate is a reagent with very high buffering capacity for formulating screens or for optimization. Purity: >99% Appearance : Crystalline powder Physical State : Solid Solubility : Soluble in water (850 mg/ml at 20 °C). pH : 4.1-4.5 Storage : Store at room temperature Density : 2.04 g/cm3 at 20° C Shelf Life : 60 Months HSN Code : 28352200 Appearance (Colour) White Appearance (Form) Crystalline powder Solubility (Turbidity) 10% aq. solution Clear Solubility (Colour) 10% aq. solution Colourless Assay (T) min. 99% pH (5% aq. solution) 4.1 – 4.5 Chloride (CI) max. 0.0005% Sulphate (SO4) max. 0.003% Iron (Fe) max. 0.001% Heavy Metals (Pb) max. 0.001% Potassium (K) max. 0.01% Absorbance (A) of 1M aq. solution in a 1cm cell v/s H2O @260nm max. 0.03 @280nm max. 0.02 
Sodium Saccharine
CAS No: 6155-57-3
Molecular Formula: C7H8NNaO5S
Formula Weight: 241.197Â g/mol
Alternate Names: 1,2-Benzisothiazol-3(2H)-one 1,1-Dioxide Sodium Salt Dihydrate Technical Information Physical State : Solid Storage : Store at room temperature, 2-8°C Refrigerator Category impurities,metabolites,intermediates,pharmaceutical standards,Fine Chemicals Appearance White to Off-White Solid Applications Saccharin Sodium Salt Dihydrate is a non-nutritive sweetener; pharmaceutic aid (flavor). Saccharin was formerly listed as reasonably anticipated to be a human carcinogen; delisted because the cancer data are not sufficient to meet the current criteria for this listing. 
Sodium Sulphate Anhydrous
CAS No:7757-82-6
Molecular Formula: Na2SO4
Molecular Weight: 142.04
Alternate Names: Disodium sulfate; Disodium sulphate; Bisodium sulfate
Application: Sodium sulfate anhydrous is for use as an inert drying agent
Purity: ≥99%
Product Information CAS number 7757-82-6 Hill Formula Na₂O₄S Chemical formula Na₂SO₄ Molar Mass 142.04 g/mol HS Code 2833 11 00 Quality Level MQ200 Applications Application Sodium sulfate anhydrous for synthesis. CAS No. 7757-82-6, EC Number 231-820-9. Physicochemical Information Density 2.70 g/cm3 (20 °C) Melting Point 888 °C pH value 5.2 – 8.0 (50 g/l, H₂O, 20 °C) Bulk density 1400 – 1600 kg/m3 Solubility 200 g/l Toxicological Information LD 50 oral LD50 Rat > 2000 mg/kg Safety Information according to GHS RTECS WE1650000 Storage class 10 – 13 Other liquids and solids WGK WGK 1 slightly hazardous to water Disposal 14 Inorganic salts: Container I. Neutral solutions of the these salts: Container D. Before placing in Container D, check the pH with pH-Universal indicator strips (Item No. 109535). Storage and Shipping Information Storage Store at +2°C to +30°C. Transport Information Declaration (railroad and road) ADR, RID Kein Gefahrgut Declaration (transport by air) IATA-DGR No Dangerous Good Declaration (transport by sea) IMDG-Code No Dangerous Good Product Information CAS number 7757-82-6 Hill Formula Na₂O₄S Chemical formula Na₂SO₄ Molar Mass 142.04 g/mol HS Code 2833 11 00 Quality Level MQ200 Applications Application Sodium sulfate anhydrous for synthesis. CAS No. 7757-82-6, EC Number 231-820-9. Physicochemical Information Density 2.70 g/cm3 (20 °C) Melting Point 888 °C pH value 5.2 – 8.0 (50 g/l, H₂O, 20 °C) Bulk density 1400 – 1600 kg/m3 Solubility 200 g/l Toxicological Information LD 50 oral LD50 Rat > 2000 mg/kg Safety Information according to GHS RTECS WE1650000 Storage class 10 – 13 Other liquids and solids WGK WGK 1 slightly hazardous to water Disposal 14 Inorganic salts: Container I. Neutral solutions of the these salts: Container D. Before placing in Container D, check the pH with pH-Universal indicator strips (Item No. 109535). Storage and Shipping Information Storage Store at +2°C to +30°C. Transport Information Declaration (railroad and road) ADR, RID Kein Gefahrgut Declaration (transport by air) IATA-DGR No Dangerous Good Declaration (transport by sea) IMDG-Code No Dangerous Good 
Sodium ThioSulphate
CAS NO: 10102-17-7
MOLECULAR FORMULA : Na2S2O3•5H2O
MOLECULAR WEIGHT :Â 248.18
SPECIALITY FINE CHEMICALS (AR / LR / ACR /GR / IP / BP / USP / FSSAI )
Sorbic Acid
CAS NO: 110-44-1
Molecular Formula: C6H8O2
Molecular Weight: 112.13
Alternate Names: α-trans-γ-trans-Sorbic acid; (E,E)-1,3-Pentadiene-1-carboxylic acid; 2,4-Hexadienoic acid Purity: ≥99% Technical Information Appearance : Crystalline Physical State : Solid Solubility : Soluble in water. Storage : Store at 4° C Melting Point : 135-137° C Density : 1.204 g/cm3 Synonyms 2,4-Hexadienic acid CAS number 110-44-1 Grade Ph Eur,BP,NF,FCC,E 200 Hill Formula C₆H₈O₂ Molar Mass 112.13 g/mol HS Code 2916 19 95 Quality Level MQ500 Boiling point 160 – 260 °C (1013 hPa) (decomposition) Density 1.2 g/cm3 (20 °C) Flash point 127 °C Ignition temperature >130 °C Melting Point 135 – 137 °C pH value 3.3 (1.6 g/l, H₂O, 20 °C) Vapor pressure 0.01 hPa (20 °C) Bulk density 650 kg/m3 Solubility 1.6 g/l LD 50 oral LD50 Rat 7360 mg/kg LD 50 dermal LD50 Rat > 2000 mg/kg Hazard Pictogram(s) Hazard Statement(s) H315: Causes skin irritation. H319: Causes serious eye irritation. Precautionary Statement(s) P264: Wash skin thoroughly after handling. P280: Wear protective gloves/ eye protection/ face protection. P302 + P352: IF ON SKIN: Wash with plenty of water. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P332 + P313: If skin irritation occurs: Get medical advice/ attention. P337 + P313: If eye irritation persists: Get medical advice/ attention. Signal Word Warning Storage class 10 – 13 Other liquids and solids WGK WGK 1 slightly hazardous to water Disposal 3 Relatively unreactive organic reagents should be collected in container A. If halogenated, they should be collected in container B. For solid residues use container C. Categories of danger irritant Storage Store at +15°C to +25°C. Assay (acidimetric, calc. on anhydrous substance) 99.0 – 101.0 % Assay (HPLC, calc. on anhydrous substance) 98.0 – 102.0 % Identity passes test Appearance of solution (5 %; ethanol 96 %) passes test Melting range (lower value) ≥ 133 °C Melting range (upper value) ≤ 135 °C Heavy metals (as Pb) ≤ 0.0010 % As (Arsenic) ≤ 0.0003 % Cd (Cadmium) ≤ 0.001 % Cu (Copper) ≤ 0.001 % Hg (Mercury) ≤ 0.0001 % Pb (Lead) ≤ 0.0002 % Zn (Zinc) ≤ 0.001 % Aldehydes (as Acetaldehyd) ≤ 0.15 % Acetone ≤ 5000 ppm Other residual solvents (ICH Q3C) excluded by the manufacturing process Thermal stability (105 °C) No coloration Loss on drying ≤ 0.5 % Water ≤ 0.5 % Sulfated ash ≤ 0.2 % 
Tri Sodium OrthoPhosphate
CAS NO: 10101-89-0
MOLECULAR FORMULA : Na3PO4Â 12H2O
MOLECULAR WEIGHT : 380.12
SPECIALITY FINE CHEMICALS (AR / LR / ACR /GR / IP / BP / USP / FSSAI )
Urea
CAS NO: 57-13-6
MOLECULAR FORMULA: CH4N2O
MOLECULAR WEIGHT : 60.06
Description Synonyms Carbamide, Carbonyl diamide, Diaminomethanone, Carbonyldiamine Product Information CAS number 57-13-6 Grade ACS,Reag. Ph Eur Hill Formula CH₄N₂O Chemical formula CO(NH₂)₂ Molar Mass 60.05 g/mol HS Code 3105 10 00 Structure formula Image Quality Level MQ200 Physicochemical Information Density 1.32 g/cm3 (20 °C) Melting Point 134 °C pH value 7.5 – 9.5 (480 g/l, H₂O, 25 °C) Vapor pressure <0.1 hPa (25 °C) Bulk density 720 – 760 kg/m3 Solubility 1000 g/l Toxicological Information LD 50 oral LD50 Rat 8471 mg/kg LD 50 dermal LD50 Rat 8200 mg/kg Safety Information according to GHS RTECS YR6250000 Storage class 10 – 13 Other liquids and solids WGK WGK 1 slightly hazardous to water Disposal 3 Relatively unreactive organic reagents should be collected in container A. If halogenated, they should be collected in container B. For solid residues use container C. Storage and Shipping Information Storage Store at +15°C to +25°C. Specifications Assay (ex N) 99.0 – 100.5 % Assay (ex N, calc. on dried substance) 99.0 – 101.5 % Purity (DSC (differential scanning calorimetry)) ≥ 99.5 mol% Identity (IR-spectrum) passes test Appearance of solution (10 %; Wasser; color) colourless Appearance of solution (10 %; Wasser; clarity) clear In water insoluble matter ≤ 0.003 % Acidity, Alkalinity ≤ 0.0005 meq/g Melting point (DSC) 132 – 135 °C NH₄ (Ammonium) ≤ 0.0500 % Chloride (Cl) ≤ 0.0005 % Sulfate (SO₄) ≤ 0.001 % Heavy metals (as Pb) ≤ 0.0004 % Biuret ≤ 0.05 % Sulfated ash (600 °C) ≤ 0.005 % Cu (Copper) ≤ 0.0001 % Fe (Iron) ≤ 0.0001 % Pb (Lead) ≤ 0.0002 % Loss on Drying (105 °C) ≤ 1.0 % Corresponds to ACS, Reag. Ph Eur 
Showing 64–72 of 74 items
